Restore a neglected acoustic guitar - a step by step guide

How to Restore a Neglected Acoustic Guitar: A Step-by-Step Guide


Acoustic guitars are more vulnerable to neglect than electrics. The combination of a hollow body, hide glue construction, and unfinished tonewoods means that years of poor storage, humidity neglect, and lack of maintenance can cause real structural and cosmetic damage. But many neglected acoustics are recoverable — and the process of bringing one back is deeply satisfying. Here's how to approach it.

Assess the Structural Condition First

Before any cleaning or cosmetic work, assess the structural integrity of the instrument. Acoustic guitars are glued constructions, and the glue joints are the first thing to check:

  • Bridge: Press firmly on the bridge. Any flex or lifting at the edges indicates a failing bridge joint — this needs a luthier before anything else.
  • Braces: Look inside the soundhole with a torch. Any loose or detached braces will be visible or audible as a rattle when you tap the top.
  • Binding: Check the binding around the body and neck for lifting or separation.
  • Neck joint: Check the neck angle — a neck that has rotated forward (high action at the body end) may need a reset.
  • Top: Any bellying behind the bridge (the top bowing upward) indicates string tension stress, often combined with humidity issues.

If any of these structural issues are present, address them with a luthier before proceeding. Cleaning a guitar with a failing bridge joint or loose braces can make things worse.

Step 1: Remove the Strings

Remove all strings. This gives full access to the fingerboard, bridge, and body, and also relieves string tension — useful if the guitar has been under tension in a dry environment.

Step 2: Clean the Body

Start with a dry microfibre cloth to remove dust and loose debris. Work through the body with a quality instrument polish, paying attention to the area around the soundhole, the back of the neck, and the body edges where grime accumulates. The LORE® Instrument Polish is petroleum-free and safe for all finish types. For stubborn residue, naphtha on a cloth is effective and safe.

Clean inside the soundhole as far as you can reach with a dry cloth — dust and debris inside the body can affect resonance and harbour mould.

Step 3: Revive the Fingerboard

Acoustic guitar fingerboards are almost always unfinished rosewood or ebony, and they suffer badly from neglect. Clean thoroughly with a soft brush and wooden toothpick for fret slot debris, then condition with a quality fingerboard oil.

The LORE® Cold Pressed Lemon Seed Fingerboard Oil penetrates deeply into dry tonewoods and restores suppleness without residue. On a severely dry board, allow 10–15 minutes for absorption and consider a second application after 24 hours. Wipe away all excess thoroughly — oil left around the fret edges can cause problems.

Step 4: Address the Bridge and Saddle

Clean the bridge carefully with a soft brush and dry cloth. The saddle slot can accumulate debris — a cotton bud works well for cleaning it out. If the saddle is bone or synthetic bone and appears dry, a very light application of fingerboard oil on a cotton bud can help — wipe away any excess immediately.

Step 5: Clean and Lubricate the Nut

Clean the nut slots with a cotton bud. Before restringing, lubricate the nut slots with graphite (from a soft pencil) or a small amount of beeswax. This reduces string binding at the nut, which is a common cause of tuning instability on neglected acoustics.

Step 6: Protect the Finish

Once clean, protect the body finish with a carnauba-based wax. The LORE® Fingerboard and Body Wax provides durable natural protection and is safe for all finish types. Apply thinly, allow to haze, and buff to a shine.

Step 7: Humidity Control Going Forward

Acoustic guitars are particularly sensitive to humidity. If the guitar has suffered from dryness, invest in a case humidifier and a hygrometer. Maintain 45–55% relative humidity in the case. This single step prevents the majority of acoustic guitar structural problems.

Step 8: Restring and Set Up

Fit fresh strings, check neck relief and adjust if needed, and check the action at the nut and saddle. A properly restored and set-up acoustic will often sound noticeably better than it did in its neglected state — the resonance of a clean, conditioned instrument is genuinely different.

Restore it properly. The LORE® range covers every surface of your acoustic — petroleum-free care that brings instruments back to life.
Explore the LORE® Range →